Part Search Results For "MO"

Part Number	Description	In Stock
WAM39301021 Mfr: molex	Conn Shrouded Header HDR 40 POS 1.27mm Solder RA Thru-Hole Tube	0
WAM428160512 Mfr: molex	Conn Housing F 5 POS 10mm Crimp ST Panel Mount Bag	0
WAM430200400 Mfr: molex		0
WAM430251600 Mfr: molex	Conn Housing F 16 POS 3mm Crimp ST Cable Mount Bag	0
WAM430450426 Mfr: molex	43045-0426	0
WAM430450614 Mfr: molex	Res Metal Film 120K Ohm 5% ±250PPM/°C AXL Thru-Hole Ammo Pack	0
WAM430451821 Mfr: molex	0430451821	0
WAM431603102 Mfr: molex	LED Bi-Color Green/Orange 574nm/610nm Chip LED 4-Pin SMD T/R	0
WAM436500201 Mfr: molex		0
WAM436500227 Mfr: molex	Inductor Power Shielded 6.8uH 20% 10A 12MHz 2-Pin Surface Mount T/R	0
WAM436500229 Mfr: molex		0
WAM436500329 Mfr: molex	43650-0329	0
WAM460150802 Mfr: molex	Ind High Current Power Wirewound 120nH 10% 100KHz Ferrite 60A T/R	0
WAM471510002 Mfr: molex		0
WAM5022250801 Mfr: molex	5022250801	0
WAM676433910 Mfr: molex		0
WAM702461401 Mfr: molex	Conn Shrouded Header HDR 14 POS 2.54mm Solder ST Thru-Hole Tray	0
WAM702462001 Mfr: molex	Res Precision Metal Film 357 Ohm 0.1% 2/5W ±25ppm/°C Conformal Solder Ammo Pack	0
WAM855105119 Mfr: molex	Switch Snap Action NO/NC SPDT Short Hinge Lever Right Angle PC Pins 250VAC 125VDC 0.59N Carton	0
WAM878321620 Mfr: molex	87832-1620	0
WAM901200763 Mfr: molex	Conn Unshrouded HDR 3 POS 2.54mm Solder ST Through Hole Tray	0
WAM901200764 Mfr: molex	Conn Unshrouded Header HDR 4 POS 2.54mm Solder ST Thru-Hole Tray	0
WAM901310765 Mfr: molex	Conn Unshrouded Header HDR 10 POS 2.54mm Solder ST Thru-Hole Tray	0
WAM901361203 Mfr: molex		0
WAM901361204 Mfr: molex	Conn Shrouded Header HDR 4 POS 2.54mm Solder ST Thru-Hole Tray	0
WAM901361205 Mfr: molex	Conn Shrouded Header HDR 5 POS 2.54mm Solder ST Thru-Hole Tray	0
WAM901362103 Mfr: molex	Conn Shrouded Header HDR 3 POS 2.54mm Solder RA Thru-Hole Tray	0
WAM901362202 Mfr: molex	Conn Shrouded Header HDR 2 POS 2.54mm Solder RA Thru-Hole Tray	0
WAP7205 Mfr: zyxel	MOCA2.0BONDED AC1300 AP EXTNDR	0
WB-200-CE-4 Mfr: wattbox	MOUNTED POWER COND. 4-OUTLETS	0
W-HT-2038 Mfr: molex	TOOLING EXTRACTOR	0
WiFi-BGN Mfr: moxa	Sparklan Wi-Fi Package	0
Wi-Fi-BGN(252NI) Mfr: moxa	WiFi Package	0
WK-112-01 Mfr: moxa	Wall-mounting kit, 2 plates, 8 screws	0
WK-160-01 Mfr: moxa	Wall-mounting kit with 1 plate (160 x 89 x 2.0 mm), 4 screws	0
WK-160-02 Mfr: moxa	Wall-mounting kit	0
WK-178-01 Mfr: moxa	Wall-mounting kit with 1 plate (178 x 25 x 1.5 mm), 3 screws	0
WK-18 Mfr: moxa	Wall-mounting kit, 1 plate, 18 x 120 x 8.5 mm	0
WK-195 Mfr: moxa	Wall Mounting Kit for PT-7710 series modular Ethernet Switches	0
WK-20-02 Mfr: moxa	Wall-mounting kit, 3 screws, 20 x 140 x 2 mm	0
WK-24-01 Mfr: moxa	Wall-mounting kit with 1 plate (178 x 24 x 10.5 mm)	0
WK-25 Mfr: moxa	WK-25/WKx2, 43x25x2mm, FMSx4, M3x6mm	0
WK-30 Mfr: moxa	Wall mounting kit for EDS-205A	0
WK-30-02 Mfr: moxa	Wall-mounting kit, 2 plates, 4 screws, 30 x 66.8 x 2 mm	0
WK-32-01 Mfr: moxa	Wall-mounting kit with 2 plates (32 x 29.5 mm) and 4 screws (M3 x 6 mm)	0
WK-33-01 Mfr: moxa	Wall-mounting kit with 2 plates (98.6 x 33.8 x 5 mm) and 4 TMS M3 4-mm screws	0
WK-35-01 Mfr: moxa	WK-35-01 Wall Mount Kit Accessory	0
WK-35-02 Mfr: moxa	WK-35-02 Wall Mount Kit Accessory V1.0	0
WK-35-04 Mfr: moxa	2 pcs of plates (35x44x2.5mm) with 6 screws (FTSx6 M3x4mm)	0
WK-35-05 Mfr: moxa	Wall-mounting kit with 2 plates (35 x 44 x 2.5 mm) and 6 NYLOK screws	0
WK-36-02 Mfr: moxa	Wall mounting kit for NPort IA5150A/5254A	0
WK-40-01 Mfr: moxa	Wall-mounting kit, 2 plates, 4 screws, 40 x 58 x 2 mm	0
WK-41-01 Mfr: moxa	Wall-mounting kit with 1 plate (41 x 144 x 7.5 mm)	0
WK-44-01 Mfr: moxa	2 pcs of L-shape plates (44x57.5x1.6 mm) with 8 screws (FMS 90° 3*8mm)	0
WK-45-01 Mfr: moxa	2 pcs of L-shape plates (45x57x2.5 mm) with 8 screws (FMS 90° 3*8mm)	0
WK-46 Mfr: moxa	Wall Mounting Kit	0
WK-46-01 Mfr: moxa	Wall Mounting Kit	0
WK-51-01 Mfr: moxa	Wall-mounting kit, 51mm wide	0
WK-55 Mfr: moxa	Wall-mounting kit, 55mm high	0
WK-56-01 Mfr: moxa	Wall-mounting kit with 2 plates (56 x 33.3 x 2 mm) and 4 screws	0
WK-60-01 Mfr: moxa	Wall Mounting Kit	0
WK-71-01 Mfr: moxa	UC-3400A Wall-mounting Kit with 4 M3 screws	0
WK-75 Mfr: moxa	Wall Mounting Kit for EDS-600 series modular DIN-Rail Ethernet Switches	0
WK-90-01 Mfr: moxa	Wall mount kit for ioLogik E1500 series	0
WK-TN-4900 Mfr: moxa	Transition wall-mounting kit with 1 plate (250 x 162 x 5 mm) for the TN-4900 Series to adapt to the existed TN-5800/5900 mounting holes	0
WK-TN-5308A Mfr: moxa	Transition wall-mounting kit with 1 plate (197 x 60 x 4 mm) for the TN-5308A Series to adapt to the existed TN-5308 mounting holes	0
WK-UP-14168 Mfr: moxa	Wall-mounting kit with 2 plates (35 x 44 mm) and 6 screws (FMS M3 x 4 mm); for the UPort 1400 and and 1600-8 models	0
WK-UP200A-BAK-SI Mfr: moxa	Wall-mounting kit for the UPort 200A back side with 2 plates (60x27x2mm) and 6 screws (M3x5mm)	0
WK-UP200A-BOT-SI Mfr: moxa	Wall-mounting kit for the UPort 200A bottom side with 2 plates (43x30x2mm) and 6 screws (M3x5mm)	0
WK-UP400A-BAK-BK Mfr: moxa	Wall-mounting kit for the UPort 400A back side with 2 plates (60x27x2mm) and 6 screws (M3x5mm)	0
WK-UP400A-BOT-BK Mfr: moxa	Wall-mounting kit for the UPort 400A bottom side with 2 plates (43x30x2mm) and 6 screws (M3x5mm)	0
WM2PD-0.5-26.5-S Mfr: werbel microwave	Model WM2PD-0.5-26.5-S from Werbel Microwave is a wideband 2-way in-line power splitter covering of 500 MHz to 26.5 GHz with excellent return loss, low insertion loss, and high isolation performance. With ultrawideband performance, amplitude balance is typically 0.24dB and phase unbalance is typically 2.6deg. Insertion loss is low for the bandwidth, coming in at a typical 1.2dB above 3dB splitting loss. Return loss 16dB typical. Isolation 18dB typical. The device is precision-assembled and tested in the USA.	0
WM2PD-0.5-6-N Mfr: werbel microwave	Model WM2PD-0.5-6-N from Werbel Microwave is a 2-way power splitter covering the continuous bandwidth of 500 MHz to 6 GHz. The product features low insertion loss, high isolation and excellent VSWR performance. Tight phase matching and amplitude balance between outputs. Aluminum body with stainless steel N female connectors. Ready for 5G and 6G deployment. The device is RoHS compliant. Typical phase balance of 2 degrees and insertion loss of 0.8dB.	0
WM2PD-0.5-6-S Mfr: werbel microwave	Model WM2PD-0.5-6-S from Werbel Microwave is a 2-way power splitter covering the continuous bandwidth of 500 MHz to 6 GHz in a small sized enclosure with versatile mounting options. The device is RoHS compliant. This part has versatile mounting options. Standard through holes mount the part from the broad surface, while threaded holes allow for bulkhead rack-mountable mounting. Typical insertion loss of 0.7dB. Typical isolation of 23dB. Return loss 19dB typical. Amplitude balance 0.2dB typical. Phase balance 2 degrees typical.	0
WM2PD-2-26.5-S Mfr: werbel microwave	Model WM2PD-2-26.5-S from Werbel Microwave is a wideband 2-way in-line power splitter covering of 2 to 26.5 GHz with excellent return loss, low insertion loss, and high isolation performance. Insertion loss is only 0.6dB typical above 3dB split loss, with high isolation of 20dB typical. Amplitude balance is typically .07dB, while input and output return losses are typically 16 and 20dB, respectively. We are launching the new 26.5GHz product line, this is one of several models to be introduced. Designed, assembled, and tested in the USA.	0
WM2PD-6-26.5-S Mfr: werbel microwave	Model WM2PD-6-26.5-S from Werbel Microwave is a wideband 2-way in-line power splitter that covers 6 to 26.5GHz with SMA-F connectors. Aluminum body enclosure with stainless steel connectors. Return loss at the input port is 17.2dB typical. Return loss output is 18.4dB typical. Insertion loss above 3.01dB is 0.57dB typical. Isolation of the splitter between outputs is 21dB typical. The unit has excellent amplitude and phase balance. Designed to handle 20W as a splitter. Made in USA.	0
WM3PD-18-26.5-S Mfr: werbel microwave	Model WM3PD-18-26.5-S from Werbel Microwave is a precision-manufactured 3-way power splitter that covers 18 to 26.5GHz with SMA connectors. High isolation of 23.9dB typical. Tightly controlled phase balance of 2.3 degrees typical. Return loss input of 15.3dB typ. return loss output 16.1dB typ. For use in 50-ohm system impedance. Made in USA.	0
WM4PD-0.5-26.5-S Mfr: werbel microwave	Model WM4PD-0.5-26-S from Werbel Microwave is a wideband 4-way in-line power splitter covering of 500 MHz to 26.5 GHz with excellent return loss, low insertion loss, and high isolation performance. The product is a new offering of the 26.5GHz series offered by Werbel Microwave. Precision assembled, tested, and designed in the USA.	0
WM4PD-2-26.5-S Mfr: werbel microwave	Model WM4PD-2-26.5-S from Werbel Microwave is a wideband 4-way in-line power splitter covering of 2 to 26.5 GHz with excellent return loss, low insertion loss, and high isolation performance. Our own design of the new 26.5GHz series, precision-assembled and tested in the USA. Isolation 19dB typical.	0
WM8PD-6-26.5-S Mfr: werbel microwave	Model WM8PD-6-26.5-S from Werbel Microwave is a wideband 8-way in-line power splitter covering of 6 to 26.5 GHz with excellent return loss, low insertion loss, and high isolation performance. Return loss 19dB typical. Insertion loss 1.3dB typical. Isolation 19dB typical. Amplitude balance ±0.3dB typical. Phase balance ±4 degrees typical.	0
WM8PD-GPS-ACT-S Mfr: werbel microwave	Model WM8PD-GPS-ACT-S from WerbelMicrowave is a one-input, eight-output GPS splitter. The typical application allows the GPS signal from an active GPS antenna located on the roof to be split evenly among eight GPS receivers. The WM8PD-GPS-ACT-S passes +5VDC to the antenna connected at the RF IN port by way of internal bias tee network. All outputs are DC blocked with 200O DC load to simulate an antenna DC current draw for any receiver connected. All eight channels provide signal gain to help overcome the loss of the splitter and associated cabling. The product is versatile in that it allows for two power supply options: 120VAC wall adapter (provided) for benchtop use, or +5VDC direct connection by feedthrough for permanent installations into chassis or rack mount systems. Manufactured in the USA.	0
WMBRS20-MB-T9B6 Mfr: apc schneider	MODULAR BATTERY REPLACEMENT SVC	0
WMBRS24-MB-T9B6 Mfr: apc schneider	MODULAR BATTERY REPLACEMENT SVC	0
WMBRS26-MB-T9B6 Mfr: apc schneider	MODULAR BATTERY REPLACEMENT SVC	0
WMC-0.3-8-10dB-S Mfr: werbel microwave	Model WMC-0.3-8-10dB-S from Werbel Microwave is a directional coupler that covers 300 MHz to 8 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Frequency sensitivity is ±0.6 dB typical. High directivity of 25dB typical. Mainline insertion loss of 1.3dB typical includes loss due to coupling factor. Return loss 23dB typical. Aluminum enclosure measures 6.00 x 0.73 x 0.50 inches with threaded mounting holes. SMA Female connectors. The device is RoHS compliant but may be special ordered with Lead solder to support military applications.	0
WMC-0.3-8-20dB-S Mfr: werbel microwave	Model WMC-0.3-8-20dB-S from Werbel Microwave is a directional coupler that covers 300 MHz to 8 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Coupling flatness ±0.6 dB typical. Directivity 25dB typical. Return loss 26dB typical. Insertion loss 0.5dB typical. Enclosure measures 6.00 x 0.73 x 0.50 inches with threaded mounting holes. SMA Female connectors. Device is RoHS complaint.	0
WMC-0.3-8-30dB-S Mfr: werbel microwave	Model WMC-0.3-8-30dB-S from Werbel Microwave is a directional coupler that covers 300 MHz to 8 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. The very wideband response covers the upper portion of UHF, L, S and C bands making it very useful in test and measurement applications. The enclosure measures 6.00 x 0.73 x 0.50 inches with threaded mounting holes on both sides for support. Typical coupling flatness ±0.6dB. Directivity 23dB typical. Return loss 25dB typical. Insertion loss 0.5dB typical. Rugged stainless-steel connectors and aluminum enclosure. Designed, tested, and assembled in the USA.	0
WMC-0.5-18.5-10dB-S Mfr: werbel microwave	Model WMC-0.5-18.5-10dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 18.5 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. One device measures only 4.40 x 0.73 x 0.73 inches and covers UHF, Telecom, L, S, C, X, Ku and part of K band. Threaded mounting holes on both sides of the unit provide support. Rugged, stainless steel SMA connectors. Our unique taper structure design allows for minimal ripple in the broad passband. Assembled and tested in USA.	0
WMC-0.5-18.5-20dB-S Mfr: werbel microwave	Model WMC-0.5-18.5-20dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 18.5 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Our design delivers super flat coupling passband ripple response with high directivity across several octave bands of military radio use and wireless telecom applications. Useful on the outputs of amplifiers to provide AGC loop feedback. Designed, assembled and tested in USA. The device is RoHS compliant and covers UHF, L, S, C, X, Ku and part of K band.	0
WMC-0.5-20-10dB-S Mfr: werbel microwave	Model WMC-0.5-20-10dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 20 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. The ultra-wideband design covers the upper UHF, L, S, C, X, Ku and lower K band in one package measuring 4.40 x 0.73 x 0.50 inches with threaded mounting holes on both sides. Durable, stainless-steel SMA connectors. The aluminum enclosure is rugged. Assembled and tested in USA. Made with RoHS compliant materials.	0
WMC-0.5-20-20dB-S Mfr: werbel microwave	Model WMC-0.5-20-20dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 20 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Many military and telecom bands are covered within a single, small size enclosure. Extremely flat ±0.6dB typical coupling passband ripple makes for high accuracy and low signal degradation in AGC loops and sensing applications. From upper UHF to lower K bands. Designed, assembled and tested in USA.	0
WMC-0.5-20-6dB-S Mfr: werbel microwave	Model WMC-0.5-20-6dB-S is a wideband directional coupler that provides a flat nominal 6dB coupling value (units measure near 7.5dB) over the continuous bandwidth of 500MHz to 20GHz. Made in the USA.	0
WMC-0.5-2-10dB-S Mfr: werbel microwave	Model WMC-0.5-2-10dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 2 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Stripline design handles much higher power than equivalent core-and-wire models, while the enclosure remains minimally sized at 3.600 x 0.600 x 0.38 inches with SMA-Female connectors. The device is RoHS compliant, and Sn/Pb solder is available on special order. The device has coverage of the upper band of UHF as well as L-band. The mainline and coupled arm VSWR is 1.15:1 typical, minimizing reflections and leading to highly accurate measurements. Designed, assembled, and tested in the USA.	0
WMC-0.5-2-20dB-S Mfr: werbel microwave	Model WMC-0.5-2-20dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 2 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Very low insertion loss of 0.25dB typical, and higher power handling than equivalent core-and-wire designs. Mainline and coupled port VSWR is 1.15:1 typical, making for high measurement accuracy with minimal reflections. This device is 3.6 inches long and has stainless steel SMA connectors. This model is RoHS compliant, however lead solder is available on special order. Covers L-band and UHF. Assembled and tested in USA.	0
WMC-0.5-2-30dB-S Mfr: werbel microwave	Model WMC-0.5-2-30dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 2 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. The L-band applications for military radio are covered, as well as cellular 800-900MHz and the upper portion of UHF. The high coupling value allows for accurate measurements with minimal power diversion from the system. Return loss is typically better than 1.15:1, making it almost electrically invisible in your system. USA assembled, design and tested. The device is RoHS compliant, but lead solder is available on special order for military applications.	0
WMC-0.5-2-6dB-S Mfr: werbel microwave	Model WMC-0.5-2-6dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 2 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. The device covers the upper portion of the UHF band as well as L band in a single unit measuring just 3.60 x 0.60 x 0.38 inches. The design minimizes reflections and increases accuracy of the measurement. Mainline insertion loss 1.2dB typical includes coupling factor. The 6dB coupling ratio gives an approximate 75/25% splitting ratio and may be used as such to distribute signals unequally where required, often to make up for asymmetrical losses elsewhere in a system. Directivity 23dB typical. Return loss 23dB typical. Designed, assembled, and tested in USA.	0
WMC-1-20-10dB-S Mfr: werbel microwave	Model WMC-1-20-10dB-S from Werbel Microwave is a directional coupler that covers 1 GHz to 20 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. One device covers military octave bands including L, S, C, X, Ku and a portion of K band. The wideband 10dB coupling factor provides a nominal 90/10% splitting ratio and may be used as such where an unequal tap of a signal is required. Assembled and tested in USA. The device is RoHS complaint but may be ordered special with Pb/Sn solder.	0
WMC-1-20-20dB-S Mfr: werbel microwave	Model WMC-1-20-20dB-S from Werbel Microwave is a directional coupler that covers 1-20 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Couplers are often used for the amplifier output gain control loops. The modular approach provides rugged, stainless-steel connectors. The device is well suited for electronic warfare test and measurement applications. It covers several bands including L, S, C, X, Ku and the lower portion of K band. The product is RoHS compliant but may be specially ordered with leaded solder. Its aluminum enclosure measures 4.40 x 0.73 x 0.50 inches with blind tapped mounting holes. Designed, assembled, and tested in USA.	0
WMC-2-18-10dB-S Mfr: werbel microwave	Model WMC-2-18-10dB-S from Werbel Microwave is a directional coupler that covers 2 to 18 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Frequency sensitivity, or coupling flatness, is very good, with ±0.3dB typical. The aluminum enclosure measures 2.25 x 0.73 x 0.50 inches with threaded mounting holes. Coupling flatness ±0.35dB typical. Insertion loss 0.8dB typical. Directivity 17B typical. Higher directivity is available on special order. Return loss 19dB typical. SMA Female connectors. The device is RoHS complaint, but Sn/Pb solder is available for military applications on special build to order. The device covers the letter bands S, C, X and Ku band all in one enclosure. Our own unique coupling design allows for excellent flatness, thereby increasing measurement accuracy. Designed, assembled and tested in the USA.	0
WMC-2-18-15dB-S Mfr: werbel microwave	Model WMC-2-18-15dB-S+ is a directional coupler that covers 2-18GHz with a flat response over the band. Features 15dB coupling response with broadband flat coupling response, high directivity, and excellent return loss performance. Designed, assembled, and tested in USA with lead free solder making it RoHS compliant, however if you require, they may be specially ordered with lead solder for military applications. Coupling flatness ±0.35 typical. Insertion loss 0.8dB typical. Directivity 17dB typical. Return loss 19dB typical.	0

WAM39301021
Mfr: molex

Conn Shrouded Header HDR 40 POS 1.27mm Solder RA Thru-Hole Tube

0

WAM428160512
Mfr: molex

Conn Housing F 5 POS 10mm Crimp ST Panel Mount Bag

0

WAM430200400
Mfr: molex

0

WAM430251600
Mfr: molex

Conn Housing F 16 POS 3mm Crimp ST Cable Mount Bag

0

WAM430450426
Mfr: molex

43045-0426

0

WAM430450614
Mfr: molex

Res Metal Film 120K Ohm 5% ±250PPM/°C AXL Thru-Hole Ammo Pack

0

WAM430451821
Mfr: molex

0430451821

0

WAM431603102
Mfr: molex

LED Bi-Color Green/Orange 574nm/610nm Chip LED 4-Pin SMD T/R

0

WAM436500201
Mfr: molex

0

WAM436500227
Mfr: molex

Inductor Power Shielded 6.8uH 20% 10A 12MHz 2-Pin Surface Mount T/R

0

WAM436500229
Mfr: molex

0

WAM436500329
Mfr: molex

43650-0329

0

WAM460150802
Mfr: molex

Ind High Current Power Wirewound 120nH 10% 100KHz Ferrite 60A T/R

0

WAM471510002
Mfr: molex

0

WAM5022250801
Mfr: molex

5022250801

0

WAM676433910
Mfr: molex

0

WAM702461401
Mfr: molex

Conn Shrouded Header HDR 14 POS 2.54mm Solder ST Thru-Hole Tray

0

WAM702462001
Mfr: molex

Res Precision Metal Film 357 Ohm 0.1% 2/5W ±25ppm/°C Conformal Solder Ammo Pack

0

WAM855105119
Mfr: molex

Switch Snap Action NO/NC SPDT Short Hinge Lever Right Angle PC Pins 250VAC 125VDC 0.59N Carton

0

WAM878321620
Mfr: molex

87832-1620

0

WAM901200763
Mfr: molex

Conn Unshrouded HDR 3 POS 2.54mm Solder ST Through Hole Tray

0

WAM901200764
Mfr: molex

Conn Unshrouded Header HDR 4 POS 2.54mm Solder ST Thru-Hole Tray

0

WAM901310765
Mfr: molex

Conn Unshrouded Header HDR 10 POS 2.54mm Solder ST Thru-Hole Tray

0

WAM901361203
Mfr: molex

0

WAM901361204
Mfr: molex

Conn Shrouded Header HDR 4 POS 2.54mm Solder ST Thru-Hole Tray

0

WAM901361205
Mfr: molex

Conn Shrouded Header HDR 5 POS 2.54mm Solder ST Thru-Hole Tray

0

WAM901362103
Mfr: molex

Conn Shrouded Header HDR 3 POS 2.54mm Solder RA Thru-Hole Tray

0

WAM901362202
Mfr: molex

Conn Shrouded Header HDR 2 POS 2.54mm Solder RA Thru-Hole Tray

0

WAP7205
Mfr: zyxel

MOCA2.0BONDED AC1300 AP EXTNDR

0

WB-200-CE-4
Mfr: wattbox

MOUNTED POWER COND. 4-OUTLETS

0

W-HT-2038
Mfr: molex

TOOLING EXTRACTOR

0

WiFi-BGN
Mfr: moxa

Sparklan Wi-Fi Package

0

Wi-Fi-BGN(252NI)
Mfr: moxa

WiFi Package

0

WK-112-01
Mfr: moxa

Wall-mounting kit, 2 plates, 8 screws

0

WK-160-01
Mfr: moxa

Wall-mounting kit with 1 plate (160 x 89 x 2.0 mm), 4 screws

0

WK-160-02
Mfr: moxa

Wall-mounting kit

0

WK-178-01
Mfr: moxa

Wall-mounting kit with 1 plate (178 x 25 x 1.5 mm), 3 screws

0

WK-18
Mfr: moxa

Wall-mounting kit, 1 plate, 18 x 120 x 8.5 mm

0

WK-195
Mfr: moxa

Wall Mounting Kit for PT-7710 series modular Ethernet Switches

0

WK-20-02
Mfr: moxa

Wall-mounting kit, 3 screws, 20 x 140 x 2 mm

0

WK-24-01
Mfr: moxa

Wall-mounting kit with 1 plate (178 x 24 x 10.5 mm)

0

WK-25
Mfr: moxa

WK-25/WKx2, 43x25x2mm, FMSx4, M3x6mm

0

WK-30
Mfr: moxa

Wall mounting kit for EDS-205A

0

WK-30-02
Mfr: moxa

Wall-mounting kit, 2 plates, 4 screws, 30 x 66.8 x 2 mm

0

WK-32-01
Mfr: moxa

Wall-mounting kit with 2 plates (32 x 29.5 mm) and 4 screws (M3 x 6 mm)

0

WK-33-01
Mfr: moxa

Wall-mounting kit with 2 plates (98.6 x 33.8 x 5 mm) and 4 TMS M3 4-mm screws

0

WK-35-01
Mfr: moxa

WK-35-01 Wall Mount Kit Accessory

0

WK-35-02
Mfr: moxa

WK-35-02 Wall Mount Kit Accessory V1.0

0

WK-35-04
Mfr: moxa

2 pcs of plates (35x44x2.5mm) with 6 screws (FTSx6 M3x4mm)

0

WK-35-05
Mfr: moxa

Wall-mounting kit with 2 plates (35 x 44 x 2.5 mm) and 6 NYLOK screws

0

WK-36-02
Mfr: moxa

Wall mounting kit for NPort IA5150A/5254A

0

WK-40-01
Mfr: moxa

Wall-mounting kit, 2 plates, 4 screws, 40 x 58 x 2 mm

0

WK-41-01
Mfr: moxa

Wall-mounting kit with 1 plate (41 x 144 x 7.5 mm)

0

WK-44-01
Mfr: moxa

2 pcs of L-shape plates (44x57.5x1.6 mm) with 8 screws (FMS 90° 3*8mm)

0

WK-45-01
Mfr: moxa

2 pcs of L-shape plates (45x57x2.5 mm) with 8 screws (FMS 90° 3*8mm)

0

WK-46
Mfr: moxa

Wall Mounting Kit

0

WK-46-01
Mfr: moxa

Wall Mounting Kit

0

WK-51-01
Mfr: moxa

Wall-mounting kit, 51mm wide

0

WK-55
Mfr: moxa

Wall-mounting kit, 55mm high

0

WK-56-01
Mfr: moxa

Wall-mounting kit with 2 plates (56 x 33.3 x 2 mm) and 4 screws

0

WK-60-01
Mfr: moxa

Wall Mounting Kit

0

WK-71-01
Mfr: moxa

UC-3400A Wall-mounting Kit with 4 M3 screws

0

WK-75
Mfr: moxa

Wall Mounting Kit for EDS-600 series modular DIN-Rail Ethernet Switches

0

WK-90-01
Mfr: moxa

Wall mount kit for ioLogik E1500 series

0

WK-TN-4900
Mfr: moxa

Transition wall-mounting kit with 1 plate (250 x 162 x 5 mm) for the TN-4900 Series to adapt to the existed TN-5800/5900 mounting holes

0

WK-TN-5308A
Mfr: moxa

Transition wall-mounting kit with 1 plate (197 x 60 x 4 mm) for the TN-5308A Series to adapt to the existed TN-5308 mounting holes

0

WK-UP-14168
Mfr: moxa

Wall-mounting kit with 2 plates (35 x 44 mm) and 6 screws (FMS M3 x 4 mm); for the UPort 1400 and and 1600-8 models

0

WK-UP200A-BAK-SI
Mfr: moxa

Wall-mounting kit for the UPort 200A back side with 2 plates (60x27x2mm) and 6 screws (M3x5mm)

0

WK-UP200A-BOT-SI
Mfr: moxa

Wall-mounting kit for the UPort 200A bottom side with 2 plates (43x30x2mm) and 6 screws (M3x5mm)

0

WK-UP400A-BAK-BK
Mfr: moxa

Wall-mounting kit for the UPort 400A back side with 2 plates (60x27x2mm) and 6 screws (M3x5mm)

0

WK-UP400A-BOT-BK
Mfr: moxa

Wall-mounting kit for the UPort 400A bottom side with 2 plates (43x30x2mm) and 6 screws (M3x5mm)

0

WM2PD-0.5-26.5-S
Mfr: werbel microwave

Model WM2PD-0.5-26.5-S from Werbel Microwave is a wideband 2-way in-line power splitter covering of 500 MHz to 26.5 GHz with excellent return loss, low insertion loss, and high isolation performance. With ultrawideband performance, amplitude balance is typically 0.24dB and phase unbalance is typically 2.6deg. Insertion loss is low for the bandwidth, coming in at a typical 1.2dB above 3dB splitting loss. Return loss 16dB typical. Isolation 18dB typical. The device is precision-assembled and tested in the USA.

0

WM2PD-0.5-6-N
Mfr: werbel microwave

Model WM2PD-0.5-6-N from Werbel Microwave is a 2-way power splitter covering the continuous bandwidth of 500 MHz to 6 GHz. The product features low insertion loss, high isolation and excellent VSWR performance. Tight phase matching and amplitude balance between outputs. Aluminum body with stainless steel N female connectors. Ready for 5G and 6G deployment. The device is RoHS compliant. Typical phase balance of 2 degrees and insertion loss of 0.8dB.

0

WM2PD-0.5-6-S
Mfr: werbel microwave

Model WM2PD-0.5-6-S from Werbel Microwave is a 2-way power splitter covering the continuous bandwidth of 500 MHz to 6 GHz in a small sized enclosure with versatile mounting options. The device is RoHS compliant. This part has versatile mounting options. Standard through holes mount the part from the broad surface, while threaded holes allow for bulkhead rack-mountable mounting. Typical insertion loss of 0.7dB. Typical isolation of 23dB. Return loss 19dB typical. Amplitude balance 0.2dB typical. Phase balance 2 degrees typical.

0

WM2PD-2-26.5-S
Mfr: werbel microwave

Model WM2PD-2-26.5-S from Werbel Microwave is a wideband 2-way in-line power splitter covering of 2 to 26.5 GHz with excellent return loss, low insertion loss, and high isolation performance. Insertion loss is only 0.6dB typical above 3dB split loss, with high isolation of 20dB typical. Amplitude balance is typically .07dB, while input and output return losses are typically 16 and 20dB, respectively. We are launching the new 26.5GHz product line, this is one of several models to be introduced. Designed, assembled, and tested in the USA.

0

WM2PD-6-26.5-S
Mfr: werbel microwave

Model WM2PD-6-26.5-S from Werbel Microwave is a wideband 2-way in-line power splitter that covers 6 to 26.5GHz with SMA-F connectors. Aluminum body enclosure with stainless steel connectors. Return loss at the input port is 17.2dB typical. Return loss output is 18.4dB typical. Insertion loss above 3.01dB is 0.57dB typical. Isolation of the splitter between outputs is 21dB typical. The unit has excellent amplitude and phase balance. Designed to handle 20W as a splitter. Made in USA.

0

WM3PD-18-26.5-S
Mfr: werbel microwave

Model WM3PD-18-26.5-S from Werbel Microwave is a precision-manufactured 3-way power splitter that covers 18 to 26.5GHz with SMA connectors. High isolation of 23.9dB typical. Tightly controlled phase balance of 2.3 degrees typical. Return loss input of 15.3dB typ. return loss output 16.1dB typ. For use in 50-ohm system impedance. Made in USA.

0

WM4PD-0.5-26.5-S
Mfr: werbel microwave

Model WM4PD-0.5-26-S from Werbel Microwave is a wideband 4-way in-line power splitter covering of 500 MHz to 26.5 GHz with excellent return loss, low insertion loss, and high isolation performance. The product is a new offering of the 26.5GHz series offered by Werbel Microwave. Precision assembled, tested, and designed in the USA.

0

WM4PD-2-26.5-S
Mfr: werbel microwave

Model WM4PD-2-26.5-S from Werbel Microwave is a wideband 4-way in-line power splitter covering of 2 to 26.5 GHz with excellent return loss, low insertion loss, and high isolation performance. Our own design of the new 26.5GHz series, precision-assembled and tested in the USA. Isolation 19dB typical.

0

WM8PD-6-26.5-S
Mfr: werbel microwave

Model WM8PD-6-26.5-S from Werbel Microwave is a wideband 8-way in-line power splitter covering of 6 to 26.5 GHz with excellent return loss, low insertion loss, and high isolation performance. Return loss 19dB typical. Insertion loss 1.3dB typical. Isolation 19dB typical. Amplitude balance ±0.3dB typical. Phase balance ±4 degrees typical.

0

WM8PD-GPS-ACT-S
Mfr: werbel microwave

Model WM8PD-GPS-ACT-S from WerbelMicrowave is a one-input, eight-output GPS splitter. The typical application allows the GPS signal from an active GPS antenna located on the roof to be split evenly among eight GPS receivers. The WM8PD-GPS-ACT-S passes +5VDC to the antenna connected at the RF IN port by way of internal bias tee network. All outputs are DC blocked with 200O DC load to simulate an antenna DC current draw for any receiver connected. All eight channels provide signal gain to help overcome the loss of the splitter and associated cabling. The product is versatile in that it allows for two power supply options: 120VAC wall adapter (provided) for benchtop use, or +5VDC direct connection by feedthrough for permanent installations into chassis or rack mount systems. Manufactured in the USA.

0

WMBRS20-MB-T9B6
Mfr: apc schneider

MODULAR BATTERY REPLACEMENT SVC

0

WMBRS24-MB-T9B6
Mfr: apc schneider

MODULAR BATTERY REPLACEMENT SVC

0

WMBRS26-MB-T9B6
Mfr: apc schneider

MODULAR BATTERY REPLACEMENT SVC

0

WMC-0.3-8-10dB-S
Mfr: werbel microwave

Model WMC-0.3-8-10dB-S from Werbel Microwave is a directional coupler that covers 300 MHz to 8 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Frequency sensitivity is ±0.6 dB typical. High directivity of 25dB typical. Mainline insertion loss of 1.3dB typical includes loss due to coupling factor. Return loss 23dB typical. Aluminum enclosure measures 6.00 x 0.73 x 0.50 inches with threaded mounting holes. SMA Female connectors. The device is RoHS compliant but may be special ordered with Lead solder to support military applications.

0

WMC-0.3-8-20dB-S
Mfr: werbel microwave

Model WMC-0.3-8-20dB-S from Werbel Microwave is a directional coupler that covers 300 MHz to 8 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Coupling flatness ±0.6 dB typical. Directivity 25dB typical. Return loss 26dB typical. Insertion loss 0.5dB typical. Enclosure measures 6.00 x 0.73 x 0.50 inches with threaded mounting holes. SMA Female connectors. Device is RoHS complaint.

0

WMC-0.3-8-30dB-S
Mfr: werbel microwave

Model WMC-0.3-8-30dB-S from Werbel Microwave is a directional coupler that covers 300 MHz to 8 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. The very wideband response covers the upper portion of UHF, L, S and C bands making it very useful in test and measurement applications. The enclosure measures 6.00 x 0.73 x 0.50 inches with threaded mounting holes on both sides for support. Typical coupling flatness ±0.6dB. Directivity 23dB typical. Return loss 25dB typical. Insertion loss 0.5dB typical. Rugged stainless-steel connectors and aluminum enclosure. Designed, tested, and assembled in the USA.

0

WMC-0.5-18.5-10dB-S
Mfr: werbel microwave

Model WMC-0.5-18.5-10dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 18.5 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. One device measures only 4.40 x 0.73 x 0.73 inches and covers UHF, Telecom, L, S, C, X, Ku and part of K band. Threaded mounting holes on both sides of the unit provide support. Rugged, stainless steel SMA connectors. Our unique taper structure design allows for minimal ripple in the broad passband. Assembled and tested in USA.

0

WMC-0.5-18.5-20dB-S
Mfr: werbel microwave

Model WMC-0.5-18.5-20dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 18.5 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Our design delivers super flat coupling passband ripple response with high directivity across several octave bands of military radio use and wireless telecom applications. Useful on the outputs of amplifiers to provide AGC loop feedback. Designed, assembled and tested in USA. The device is RoHS compliant and covers UHF, L, S, C, X, Ku and part of K band.

0

WMC-0.5-20-10dB-S
Mfr: werbel microwave

Model WMC-0.5-20-10dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 20 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. The ultra-wideband design covers the upper UHF, L, S, C, X, Ku and lower K band in one package measuring 4.40 x 0.73 x 0.50 inches with threaded mounting holes on both sides. Durable, stainless-steel SMA connectors. The aluminum enclosure is rugged. Assembled and tested in USA. Made with RoHS compliant materials.

0

WMC-0.5-20-20dB-S
Mfr: werbel microwave

Model WMC-0.5-20-20dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 20 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Many military and telecom bands are covered within a single, small size enclosure. Extremely flat ±0.6dB typical coupling passband ripple makes for high accuracy and low signal degradation in AGC loops and sensing applications. From upper UHF to lower K bands. Designed, assembled and tested in USA.

0

WMC-0.5-20-6dB-S
Mfr: werbel microwave

Model WMC-0.5-20-6dB-S is a wideband directional coupler that provides a flat nominal 6dB coupling value (units measure near 7.5dB) over the continuous bandwidth of 500MHz to 20GHz. Made in the USA.

0

WMC-0.5-2-10dB-S
Mfr: werbel microwave

Model WMC-0.5-2-10dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 2 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Stripline design handles much higher power than equivalent core-and-wire models, while the enclosure remains minimally sized at 3.600 x 0.600 x 0.38 inches with SMA-Female connectors. The device is RoHS compliant, and Sn/Pb solder is available on special order. The device has coverage of the upper band of UHF as well as L-band. The mainline and coupled arm VSWR is 1.15:1 typical, minimizing reflections and leading to highly accurate measurements. Designed, assembled, and tested in the USA.

0

WMC-0.5-2-20dB-S
Mfr: werbel microwave

Model WMC-0.5-2-20dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 2 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Very low insertion loss of 0.25dB typical, and higher power handling than equivalent core-and-wire designs. Mainline and coupled port VSWR is 1.15:1 typical, making for high measurement accuracy with minimal reflections. This device is 3.6 inches long and has stainless steel SMA connectors. This model is RoHS compliant, however lead solder is available on special order. Covers L-band and UHF. Assembled and tested in USA.

0

WMC-0.5-2-30dB-S
Mfr: werbel microwave

Model WMC-0.5-2-30dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 2 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. The L-band applications for military radio are covered, as well as cellular 800-900MHz and the upper portion of UHF. The high coupling value allows for accurate measurements with minimal power diversion from the system. Return loss is typically better than 1.15:1, making it almost electrically invisible in your system. USA assembled, design and tested. The device is RoHS compliant, but lead solder is available on special order for military applications.

0

WMC-0.5-2-6dB-S
Mfr: werbel microwave

Model WMC-0.5-2-6dB-S from Werbel Microwave is a directional coupler that covers 500 MHz to 2 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. The device covers the upper portion of the UHF band as well as L band in a single unit measuring just 3.60 x 0.60 x 0.38 inches. The design minimizes reflections and increases accuracy of the measurement. Mainline insertion loss 1.2dB typical includes coupling factor. The 6dB coupling ratio gives an approximate 75/25% splitting ratio and may be used as such to distribute signals unequally where required, often to make up for asymmetrical losses elsewhere in a system. Directivity 23dB typical. Return loss 23dB typical. Designed, assembled, and tested in USA.

0

WMC-1-20-10dB-S
Mfr: werbel microwave

Model WMC-1-20-10dB-S from Werbel Microwave is a directional coupler that covers 1 GHz to 20 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. One device covers military octave bands including L, S, C, X, Ku and a portion of K band. The wideband 10dB coupling factor provides a nominal 90/10% splitting ratio and may be used as such where an unequal tap of a signal is required. Assembled and tested in USA. The device is RoHS complaint but may be ordered special with Pb/Sn solder.

0

WMC-1-20-20dB-S
Mfr: werbel microwave

Model WMC-1-20-20dB-S from Werbel Microwave is a directional coupler that covers 1-20 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Couplers are often used for the amplifier output gain control loops. The modular approach provides rugged, stainless-steel connectors. The device is well suited for electronic warfare test and measurement applications. It covers several bands including L, S, C, X, Ku and the lower portion of K band. The product is RoHS compliant but may be specially ordered with leaded solder. Its aluminum enclosure measures 4.40 x 0.73 x 0.50 inches with blind tapped mounting holes. Designed, assembled, and tested in USA.

0

WMC-2-18-10dB-S
Mfr: werbel microwave

Model WMC-2-18-10dB-S from Werbel Microwave is a directional coupler that covers 2 to 18 GHz with broadband flat coupling response, high directivity, and excellent return loss performance. Frequency sensitivity, or coupling flatness, is very good, with ±0.3dB typical. The aluminum enclosure measures 2.25 x 0.73 x 0.50 inches with threaded mounting holes. Coupling flatness ±0.35dB typical. Insertion loss 0.8dB typical. Directivity 17B typical. Higher directivity is available on special order. Return loss 19dB typical. SMA Female connectors. The device is RoHS complaint, but Sn/Pb solder is available for military applications on special build to order. The device covers the letter bands S, C, X and Ku band all in one enclosure. Our own unique coupling design allows for excellent flatness, thereby increasing measurement accuracy. Designed, assembled and tested in the USA.

0

WMC-2-18-15dB-S
Mfr: werbel microwave

Model WMC-2-18-15dB-S+ is a directional coupler that covers 2-18GHz with a flat response over the band. Features 15dB coupling response with broadband flat coupling response, high directivity, and excellent return loss performance. Designed, assembled, and tested in USA with lead free solder making it RoHS compliant, however if you require, they may be specially ordered with lead solder for military applications. Coupling flatness ±0.35 typical. Insertion loss 0.8dB typical. Directivity 17dB typical. Return loss 19dB typical.

0

We value your privacy

Search Results For: MO