Search Results For: 3m
| Part Number | Description | In Stock | |
|---|---|---|---|
|
7000129565 Mfr: 3m elec prod |
For application to sides and rear of large trucks, trailers and other vehicles to increase their visibility, especially when the vehicle is turning or crossing roadways | 0 |
|
|
7000130475 Mfr: 3m elec prod |
This low tack application tape is specially formulated to ease the application of large graphics to substrates. When graphics are printed using 3M™ Screen Printing Ink Series 9700UV, this application tape is the ideal choice. | 0 |
|
|
7000132877 Mfr: 3m elec prod |
3M™ Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3M’s proprietary cold shrink delivery system. Products are supplied prestretched on a removable core for efFiciency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated EPDM material promotes a permanent, durable environmental seal and insulation, with a typical operating temperature range from -40–194°F (-40–90°C). The 8420 insulator meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV. Applications: Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated to 1000 V. Good for repairs and environmental sealing for communication and other non-electrical applications. Important: Use insulation jacket or connector O.D. for Final ordering criteria. * Mastic pads included for cable O.D. build-up. ** Kit contains adapters. *** These sizes are listed for availability only and are not designed to be used as primary insulation. These tubes are for conduit sealing and breakouts. ****Maximum connector length: 5.625" "Point of Purchase" packaging designated by "P". Example: 8423-6P | 0 |
|
|
7000132915 Mfr: 3m elec prod |
Scotch® Buried Barricade Tape 302 is a 4 mil thick, polyethylene Film backing, buried barricade tape that is printed with a warning message. When buried 4 to 6 inches below the surface, it provides an early warning when digging before reaching a depth that could cause damage or injury to a line or worker. | 0 |
|
|
7000132918 Mfr: 3m elec prod |
3M™ Composite Film Electrical Tape 44 is a low halogen, edge tear resistant, electrical tape that's suitable for general purpose insulation, as well as anchoring and banding in motors and transformers. The tape is 600V rated and withstands a temperature range of 32 to 266 °F (0 to 130 °C). | 0 |
|
|
7000132935 Mfr: 3m elec prod |
3M™ Cable Stackers SI-1 and SIFS-1 organize cable runs with convenient space management and aid in identiFication. The 3M™ Cable Stacker SI-1 centers multiple cables on a 2 X 4 framing member. The 3M™ Furring Strip Cable Stacker SIFS-1 routes, fastens, and supports CATV, telephone, security and instrumentation cables. | 0 |
|
|
7000129546 Mfr: 3m elec prod |
Surface Preparation Adhesives enhance the adhesion of Stamark™ Tapes, especially in marginal or difFicult application conditions | 0 |
|
|
7000132934 Mfr: 3m elec prod |
3M™ Composite Film Electrical Tape 44 is a low halogen, edge tear resistant, electrical tape that's suitable for general purpose insulation, as well as anchoring and banding in motors and transformers. The tape is 600V rated and withstands a temperature range of 32 to 266 °F (0 to 130 °C). | 0 |
|
|
7000129542 Mfr: 3m elec prod |
Series 380AW is ideal for concrete and light-colored pavements on interstate highways, dark rural roads and urban streets | 0 |
|
|
7000129541 Mfr: 3m elec prod |
Series 380AW is ideal for concrete and light-colored pavements on interstate highways, dark rural roads and urban streets | 0 |
|
|
7000129540 Mfr: 3m elec prod |
Series 380AW is ideal for concrete and light-colored pavements on interstate highways, dark rural roads and urban streets | 0 |
|
|
7000130081 Mfr: 3m elec prod |
This prespacing tape is formulated with a high tack adhesive to ease the application of small text. It is the perfect choice for graphics created with 3M™ Scotchcal™ ElectroCut™ Graphic Films 7725 314 and 7725 324. | 0 |
|
|
7000130080 Mfr: 3m elec prod |
This prespacing tape is formulated with a high tack adhesive to ease the application of small text. It is the perfect choice for graphics created with 3M™ Scotchcal™ ElectroCut™ Graphic Films 7725 314 and 7725 324. | 0 |
|
|
7000129521 Mfr: 3m elec prod |
Conformable, removable pavement marking tape intended for longitudinal line applications in construction work zones where removability is required. | 0 |
|
|
7000132867 Mfr: 3m elec prod |
3M Catalog# 2273M-UC3W, 3M™ Dynatel™ Pipe/Cable/Fault/iD Locator 2273M-UC3W with Case The 3M™ Dynatel™ Locator 2250M iD is designed to find the path and estimated depth of buried cables and pipes, and detect EMS Markers UPC: 50051115156071 | 0 |
|
|
7000129547 Mfr: 3m elec prod |
Surface Preparation Adhesives enhance the adhesion of Stamark™ Tapes, especially in marginal or difFicult application conditions | 0 |
|
|
7000130989 Mfr: 3m elec prod |
Used on the 3M™ Supplied Air Hose W-3020. It has a 3/8 inch FPT Fitting. | 0 |
|
|
7000131469 Mfr: 3m elec prod |
3M(TM) Microphone, Gooseneck, 16 Inch, UPC:'50051111113023 | 0 |
|
|
7000131136 Mfr: 3m elec prod |
3M Catalog# H192, Scotch® Box Sealing Tape Dispenser H192, 2 in, 6 per case We designed the Scotch® Box Sealing Tape Dispenser H192 as a roll-on, hand-held tool that allows the operator to apply, cut, and buff tape in an easy one-hand motion. It dispenses any box sealing tape up to 2 in/48 mm wide on a 3-inch/76.2 mm core. UPC: 00021200865121 | 0 |
|
|
7000132281 Mfr: 3m elec prod |
3M™ Scotchlok™ TH-440 Scissors are anvil-type wire cutters that crimp a wide range of terminal styles. These versatile scissors have high-strength, heat-treated carbon steel construction. | 0 |
|
|
7000131000 Mfr: 3m elec prod |
When used with the 3M™ Head Suspension W-2878, the 3M™ Hatshell W-3258 meets the requirements of ANSI standard Z89.1-2003, Type 1, Class E head protection. | 0 |
|
|
7000132303 Mfr: 3m elec prod |
3M™ Scotchlok™ Carbon Steel Scissors are anvil-type wire cutters that crimp a wide range of terminal styles. These versatile scissors have high-strength, heat-treated carbon steel construction. | 0 |
|
|
7000130448 Mfr: 3m elec prod |
3M Installation Kit for Textured Surfaces, CatalogID: 3M Installation Kit for Textured Surfaces, UPC:'00051128793657 | 0 |
|
|
7000130990 Mfr: 3m elec prod |
This socket is used on the 3M™ Supplied Air Hose W-3020, Low Pressure. It is a 3/8 inch FPT brass Fitting. | 0 |
|
|
7000131625 Mfr: 3m elec prod |
3M(TM) Case, Outer, Assembly, UPC: '00051111506219 | 0 |
|
|
7000130793 Mfr: 3m elec prod |
Used with the 3M™ Connector W-3195, Low Pressure, which is used on the 3M™ Supplied Air Hose W-3020. It has a 1/4 inch MPT steel Fitting. | 0 |
|
|
7000132405 Mfr: 3m elec prod |
3M™ Scotchlok™ Insulation Displacement Connector 560N is a double run connector for parallel splicing. It electrically connects two run (through) wires while insulating the connection. It is suitable for general purpose electrical connections on an auto, boat, van or trailer. Polypropylene insulated, self stripping and flame retardant. | 0 |
|
|
7000132431 Mfr: 3m elec prod |
BB 2 X 24-SB/SC DC LHS KIT, UPC: '50054007682290 | 0 |
|
|
7000132432 Mfr: 3m elec prod |
BB2X24 SB/2SC-LHS BETTER BURIED CLOSURE KIT, UPC:'50054007682306 | 0 |
|
|
7000132433 Mfr: 3m elec prod |
BB3X24-SB/SC,DC-LHS BETTER BURIED CLOSURE KIT, UPC:'50054007682351 | 0 |
|
|
7000132434 Mfr: 3m elec prod |
BB3X24 SB/2SC-LHS BETTER BURIED CLOSURE KIT, UPC:'50054007682368 | 0 |
|
|
7000130998 Mfr: 3m elec prod |
Replacement part designed for use in side inlet ports of 3M™ Full Facepieces 7800S. | 0 |
|
|
7000131720 Mfr: 3m elec prod |
Used for protection against organic vapors, chlorine, hydrogen chloride, sulfur dioxide and high efFiciency particulates. | 0 |
|
|
7000132983 Mfr: 3m elec prod |
2522-24-DF 2522 FIBER SPLICE ORGANIZER 24 FUSION S,UPC: '00051115191497 | 0 |
|
|
7000132156 Mfr: 3m elec prod |
3M™ Heat Shrink Cable Sleeve ITCSN is a heavy wall sleeve that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio to offer electrical insulation for 1 kV rated applications. It features a cross linked polyoleFin construction that provides moisture seal protection. | 0 |
|
|
7000132143 Mfr: 3m elec prod |
3M™ Embossed Aluminum EMI Shielding Tape 1267 is an acrylic adhesive EMI shielding tape. This flame retardant tape is designed for applications that require outstanding electrical conductivity. It comes on a liner for easy die cutting and handling. The tape is rated for 600V dry applications. | 0 |
|
|
7000132173 Mfr: 3m elec prod |
49 (2 IN X 20 FT)SCOTCH BRAND ALUMINUM FOIL TAPE 2IN X 20 FT, 1 IN CORE, UPC: '00054007274834 | 0 |
|
|
7000132174 Mfr: 3m elec prod |
49-4X20 (4 X20') SCOTCH BRAND ALUMINUM FOIL TAPE,UPC: '00054007274841 | 0 |
|
|
7000131986 Mfr: 3m elec prod |
Accessories used with 3M™ Dynatel™ Locators. | 0 |
|
|
7000131617 Mfr: 3m elec prod |
For LS1000 | 0 |
|
|
7000131723 Mfr: 3m elec prod |
BE-12-3(522-02-00R03)HEADCOVER,WHITE,REG,TYCHEM(R),Catalog ID: 3M White Respirator Head Cover BE-12-3(Formerly 522-02-00R03), Regular 3 EA/Case, UPC:'50051138720907 | 0 |
|
|
7000131622 Mfr: 3m elec prod |
3M(TM) Case, Inner, UPC: | 0 |
|
|
7000131719 Mfr: 3m elec prod |
3M Catalog# 453-01-01R06, 3M™ Formaldehyde/Chlorine/Hydrogen Chloride/Sulfur Dioxide/High Efficiency Cartridge 453-01-01R06, EP3 6 EA/Case Used with 3M™ Breathe Easy™ Systems against sulfur dioxide, chlorine, formaldehyde, hydrogen chloride and high efficiency particulates. UPC: 50051138720730 | 0 |
|
|
7000131718 Mfr: 3m elec prod |
453-00-01R06 CARTRIDGE,AP3,6PK :, Catalog ID: 3MOrganic Vapor/High Efficiency Cartridge453-00-01R06, AP3 6 EA/Case, UPC: '50051138720723 | 0 |
|
|
7000131701 Mfr: 3m elec prod |
This NIOSH-approved SP3 particulate Filter helps provide high efFiciency respiratory protection in environments containing particulates. Filter should be used with 3M™ Powerflow™ Powered Air Purifying Respirator (PAPR) systems. | 0 |
|
|
7000131700 Mfr: 3m elec prod |
This NIOSH-approved P3 particulate cartridge helps provide high efFiciency respiratory protection in environments containing particulates. Filter should be used with 3M™ Breathe Easy™ Powered Air Purifying Respirator (PAPR) systems. | 0 |
|
|
7000131627 Mfr: 3m elec prod |
3M(TM) Case, Front, Model XT-1, Headset, 1/case,UPC: '00051111551974 | 0 |
|
|
7000132438 Mfr: 3m elec prod |
SLIC ES 5 IN. TC SLIC CLOSURE END SEAL TRIPLE PORT,UPC: '00054007712206 | 0 |
|
|
7000131724 Mfr: 3m elec prod |
BE-12L-3(522-02-01R03) HEAD COVER, WHITE, LRG,TYCHEM(R)QC 3/BAG, Catalog ID: 3M White RespiratorHead Cover BE-12L-3 (Formerly 522-02-01R03), Large,3 EA/Case, UPC: '00051138720919 | 0 |
|
|
7000130300 Mfr: 3m elec prod |
3M™ Prespacing Tape SCPS 55 is high tack transfer tape used to prespace markings applied to complex surfaces that will be kiss cut, electronically cut or die cut. | 0 |
|
|
7000132435 Mfr: 3m elec prod |
BB4X24-SB/SC,DC-LHS BETTER BURIED CLOSURE KIT, UPC:'50054007682405 | 0 |
|
|
7000132533 Mfr: 3m elec prod |
3M™ ScotchCode™ Wire Marker Tape ReFill Roll SDR is available in ten NEMA colors, individual numbers and consecutive numbers, letters and symbols. | 0 |
|
|
7000132572 Mfr: 3m elec prod |
4005-DPM/TR/NB SUPER MATE BRIDGE MODULE W/NO CUTOFFBLADES DRY, UPC: '00054007923183 | 0 |
|
|
7000132586 Mfr: 3m elec prod |
SLIC ES 5 IN. SC SLIC CLOSURE END SEAL SINGLE PORT,UPC: '00054007916949 | 0 |
|
|
7000132630 Mfr: 3m elec prod |
3M™ 8459 Cold Shrink Shield Adapter Kit is designed to provide sealing and grounding applications on longitudinally corrugated, conventional tape, wire and UniShield® power cables. It is rated for 5 to 8 kV and 600 amps cables. This kit offers resistance to acids, alkalis, ozone, ultraviolet light and fungus. | 0 |
|
|
7000129938 Mfr: 3m elec prod |
This prespace tape is specially formulated for use with large format screen printed and electronically cut graphics to ease the application of small text. | 0 |
|
|
7000130623 Mfr: 3m elec prod |
3M(TM) Manager's Service Kit, Catalog ID: 3MManager's Service Kit, UPC: '00051111119358 | 0 |
|
|
7000129939 Mfr: 3m elec prod |
This prespace tape is specially formulated for use with large format screen printed and electronically cut graphics to ease the application of small text. | 0 |
|
|
7000130628 Mfr: 3m elec prod |
3M(TM) Kit, Battery Latch and Button, UPC:'00051111551844 | 0 |
|
|
7000130218 Mfr: 3m elec prod |
3M Scotchcal ElectroCut Graphic Film 7720-114STransparent, 15 in x50 yd, punched, premask, UPC:'50051128734334 | 0 |
|
|
7000132683 Mfr: 3m elec prod |
4077-A PLUGGABLE MODULE SEALANT BOX (FOR ONE SUPERMATE), UPC: '00051138575694 | 0 |
|
|
7000132684 Mfr: 3m elec prod |
4077-B PLUGGABLE MODULE SEALANT BOX (FOR ONE SUPER,UPC: | 0 |
|
|
7000132685 Mfr: 3m elec prod |
4077-C PLUGGABLE MODULE SEALANT BOX (FOR TWO SUPERMATES), UPC: | 0 |
|
|
7000132686 Mfr: 3m elec prod |
4077-D PLUGGABLE MODULE SEALANT BOX (FOR THREESUPER MATES), UPC: | 0 |
|
|
7000130217 Mfr: 3m elec prod |
7720-10S WHITE 3MTP-1 15X50YD, UPC: '50051128734297 | 0 |
|
|
7000132678 Mfr: 3m elec prod |
8412-TS PLATE, 12 PORT W/ST- SINGLEMODE COUPLINGS,UPC: '50051138574159 | 0 |
|
|
7000130769 Mfr: 3m elec prod |
Replacement part for 3M™ Air Regulating Valve Assembly V-300, V300SS and 3M™ Low Pressure Connector Assembly V-400 | 0 |
|
|
7000130214 Mfr: 3m elec prod |
7720-12S BLACK 3MTP-2 30X50YD, UPC: '50051128712967 | 0 |
|
|
7000132439 Mfr: 3m elec prod |
SLIC ES 3IN TC CLOSURE END SEAL TRIPLE PORT, UPC:'00054007712213 | 0 |
|
|
7000132441 Mfr: 3m elec prod |
BB7X26-SB/2DC-LHS BETTER BURIED CLOSURE KIT, UPC:'50054007713758 | 0 |
|
|
7000130791 Mfr: 3m elec prod |
This plug, for the air control valves, is a high pressure, 1/4 inch MPT steel Fitting. | 0 |
|
|
7000130790 Mfr: 3m elec prod |
This socket is a high pressure, 1/4 inch FPT twist lock steel and braas Fitting. It is used on the 3M™ Supplied Air Hose W-9435 or W-2929. | 0 |
|
|
7000130789 Mfr: 3m elec prod |
This plug is a high pressure, 1/4 inch FPT twist lock steel Fitting. May be used on the 3M™ Supplied Air Hose W-9435 or W-2929. | 0 |
|
|
7000129458 Mfr: 3m elec prod |
Fluorescent orange microprismatic reflective sheeting with pressure sensitive adhesive for production of high quality work zone signs. Highly visible in daytime, twilight, inclement weather and at night. | 0 |
|
|
7000130787 Mfr: 3m elec prod |
Designed to be used with 3M™ H-Series Hoods, Whitecap™ Helmets and Hardcap Assemblies. | 0 |
|
|
7000132436 Mfr: 3m elec prod |
SLIC-7X33 AERIAL CLOSURE KIT - 2TC, UPC:'00054007682974 | 0 |
|
|
7000132464 Mfr: 3m elec prod |
SLIC ES 3 IN. SC SLIC CLOSURE END SEAL SINGLE PORT,UPC: '00054007570936 | 0 |
|
|
7000132465 Mfr: 3m elec prod |
SLIC-ES/3DC SLIC CLOSURE END DOUBLE PORT, UPC:'00054007570943 | 0 |
|
|
7000132474 Mfr: 3m elec prod |
3M™ Cable Stackers SI-1 and SIFS-1 organize cable runs with convenient space management and aid in identiFication. The 3M™ Cable Stacker SI-1 centers multiple cables on a 2 X 4 framing member. The 3M™ Furring Strip Cable Stacker SIFS-1 routes, fastens, and supports CATV, telephone, security and instrumentation cables. | 0 |
|
|
7000130752 Mfr: 3m elec prod |
Replacement Filter for the 3M™ Coalescing Filter Assembly W-3012/37008(AAD). | 0 |
|
|
7000130737 Mfr: 3m elec prod |
Our Scotch® Apron Taper dispenses masking paper and masking tape together to reduce shop waste, save time and improve results. Technicians simply dispense masking paper with masking tape already applied along its edge, ready to use. The apron taper doesn’t require mounting and keeps masking paper and tape rolls (sold separately) within reach and ready for use. | 0 |
|
|
7000130672 Mfr: 3m elec prod |
This clamp is used on 3M™ Whitecap™ Helmets. | 0 |
|
|
7000130788 Mfr: 3m elec prod |
A high pressure, 3/8 inch MPT twist lock Fitting that is used on the 3M™ Compressed Air Filter and Regulator Panel W-2806. | 0 |
|
|
7000119687 Mfr: 3m elec prod |
Our 3M™ Hookit™ Gold Disc 216U is precision-coated for long life and exceptionally smooth Finishing to auto body sanding projects. It features light A-weight paper backing with sharp, durable aluminum oxide abrasive – a fast, aggressive cut, yet a uniform Finish for feather-edging and primer sanding. Our load-resistant coating and available 5- or 6-hole pattern provide superior dust resistance. | 0 |
|
|
7000119653 Mfr: 3m elec prod |
3M™ Cubitron™ II Cut-Off Wheel features 3M Precision Shaped Ceramic Grain to bring you an exceptionally fast-cutting and long-lasting wheel for use on almost all materials, including stainless steel, mild steel, and aerospace alloys. This cut-off wheel surpasses 3M™ High Performance wheels in both cut and life to deliver signiFicant gains in productivity. | 0 |
|
|
7000119651 Mfr: 3m elec prod |
3M(TM) Cubitron(TM) II Cut-Off Wheel 66539, T27 5in x .09 in x 7/8 in,25 per inner, 50 per case,UPC: '00051115665394 | 0 |
|
|
7000119643 Mfr: 3m elec prod |
3M Catalog# 66520, 3M™ Cubitron™ II Cut-Off Wheel, 66520, Type 1, 4 in x .06 in x 3/8 in, 25 per inner, 50 per case 3M™ Cubitron™ II Cut-Off Wheel features 3M Precision Shaped Ceramic Grain to bring you an exceptionally fast-cutting and long-lasting wheel for use on almost all materials, including stainless steel, mild steel, and aerospace alloys. This cut-off wheel surpasses 3M™ High Performance wheels in both cut and life to deliver significant gains in productivity. UPC: 00051115665202 | 0 |
|
|
7000119633 Mfr: 3m elec prod |
3M Stikit Film Disc w/Tab 375L, 6 x NH, P150, 50per inner 250 percase, UPC: '00051141557007 | 0 |
|
|
7000119618 Mfr: 3m elec prod |
3M™ Hookit™ Paper Disc 236U offers aggressive cut and long life on a premium aluminum oxide disc with a durable edge and convenient Hookit™ attachment. A go-to product in many industrial operations, this durable disc is well suited for high production sanding operations as well as general purpose applications on paint, primer, wood, metal, plastic, and composites, including Fiberglass. | 0 |
|
|
7000119610 Mfr: 3m elec prod |
3M™ Hookit™ Clean Sanding Sheet 236U offers superior dust control, aggressive cut, and long life on a premium aluminum oxide sheet with a durable edge and convenient 3M™ Hookit™ attachment. It features a proprietary multi-hole Clean Sanding pattern that evacuates dust better than traditional sheet products — dramatically increasing sheet life. | 0 |
|
|
7000119549 Mfr: 3m elec prod |
3M™ Stikit™ Paper Disc Roll 236U offers a versatile disc with a convenient adhesive backing ready for quick and easy attachment to a 3M™ Stikit™ backup pad (sold separately). The roll offers quick access to a disc and eliminates disc liners. The disc features a strong, C-weight paper backing that resists wear during aggressive sanding. | 0 |
|
|
7000118859 Mfr: 3m elec prod |
3M™ Cloth Belt 341D is a durable aluminum oxide cloth belt recommended for your metal deburring, general metalworking, and some woodworking applications. It is suitable for wide belt, edge, or portable belt sanding, and can be used for a variety of applications on metal substrates and wood. | 0 |
|
|
7000119208 Mfr: 3m elec prod |
3M™ Cubitron™ II Fibre Disc 987C offers signiFicant gains in productivity on medium to heavy-duty operations thanks to the exceptionally high-performing 3M Precision-Shaped Grain combined with a stiff Fiber backing. This disc achieves a higher cut-rate, greater durability, and longer life than other Fiber discs — all with less grinding pressure. | 0 |
|
|
7000119737 Mfr: 3m elec prod |
Our 3M™ Stikit™ Gold Disc 216U is precision-coated for long life and exceptionally smooth auto body Finishing. It features light A-weight paper backing with sharp, durable aluminum oxide abrasive – a fast, aggressive cut, yet a uniform Finish, ideal for featheredging, primer sanding and scufFing. The disc roll features easy tear-off Stikit™ discs with adhesive backing for fast, easy change-outs. | 0 |
|
|
7000119738 Mfr: 3m elec prod |
Our 3M™ Stikit™ Gold Disc 216U is precision-coated for long life and exceptionally smooth auto body Finishing. It features light A-weight paper backing with sharp, durable aluminum oxide abrasive – a fast, aggressive cut, yet a uniform Finish, ideal for featheredging, primer sanding and scufFing. The disc roll features easy tear-off Stikit™ discs with adhesive backing for fast, easy change-outs. | 0 |
|
|
7100186439 Mfr: 3m elec prod |
Our 3M™ Cubitron II Abrasive Belt 947A built with 3M™ Precision-Shaped Grain cuts metal dramatically faster and cooler, and stays sharp longer than conventional ceramic belts. Its X-weight poly-cotton backing is flexible. This belt is optimized for low and medium pressure applications on stainless steel, mild steels, and aluminum. | 0 |
|
|
7100186628 Mfr: 3m elec prod |
Our 3M™ Trizact™ Diamond Cloth Belt 663FC represents the "next generation" in abrasive technology. It combines the predictable dimensioning of bonded wheels with the speed, consistency and ease of use of 3M abrasive belts. This unique hybrid helps you achieve a smoother Finish in less time. | 0 |
|
|
7100186627 Mfr: 3m elec prod |
Our 3M™ Trizact™ Diamond Cloth Belt 663FC represents the "next generation" in abrasive technology. It combines the predictable dimensioning of bonded wheels with the speed, consistency and ease of use of 3M abrasive belts. This unique hybrid helps you achieve a smoother Finish in less time. | 0 |
|
|
7100186626 Mfr: 3m elec prod |
Our 3M™ Trizact™ Diamond Cloth Belt 663FC represents the "next generation" in abrasive technology. It combines the predictable dimensioning of bonded wheels with the speed, consistency and ease of use of 3M abrasive belts. This unique hybrid helps you achieve a smoother Finish in less time. | 0 |
|
|
7100186603 Mfr: 3m elec prod |
3M™ Trizact™ Cloth Roll 307EA was designed for dimensioning and polishing hard metals prior to plating or bufFing. Microreplicated structures containing aluminum oxide is resin-bonded to a flexible JE-weight rayon backing and a grinding aid helps to keep the work surface cool and protect from thermal damage. 3M™ Trizact™ Cloth Roll 307EA is available in a range of grades, from A100 to A6. | 0 |
|