ASIX AX88179QF

Product Info

AX88179 is the world's first USB 3.0 to Gigabit Ethernet controller which integrates USB 3.0 PHY and 10/100/1000Mbps Gigabit Ethernet MAC/PHY in a single chip. The AX88179 is the latest addition to ASIX's USB-to-LAN product portfolio, providing a small form factor solution and plug-and-play usability, enabling embedded system designers to deliver Gigabit Ethernet connectivity while leveraging the growth and speed of USB 3.0 SuperSpeed technology.

AX88179 can be used in any embedded system with a USB host microcontroller requiring a twisted pair physical network connection. Featuring a USB interface (compliant with USB specification V3.0, V2.0 and V1.1) to communicate with a USB Host Controller, the AX88179 also integrates on-chip Gigabit Ethernet MAC and PHY (IEEE802.3, IEEE802.3u and IEEE802.3ab compatible). Additionally, the AX88179 needs only a single 25MHz crystal to drive both the USB and Ethernet PHYs.

The AX88179 offers a wide array of features including IPv4/IPv6 checksum offload engine, crossover detection and auto-correction, TCP large send offload and IEEE802.3az EEE (Energy Efficient Ethernet). The EEE defines a mechanism that allows the AX88179 to enter a low power idle state to reduce power and to achieve a more energy efficient Ethernet. It supports dynamic cable length detection and dynamic power adjustment Green Ethernet in Gigabit mode. The AX88179 also offers multiple power management Wake-on-LAN features, including Magic Packet, Microsoft Wakeup Frame and Link Status Change that allows systems to enter a low power state and wake on desired network traffic.

The AX88179 is a high performance and highly integrated ASIC which enables a low cost, small form factor, and simple plug-and-play Gigabit Ethernet network connection capability for desktops, notebook PCs, ultrabooks, cradles/port replicators/docking stations, game consoles, digital-home appliances, and any embedded system using a standard USB port.

Features:

Single chip USB 3.0 to 10/100/1000M Gigabit Ethernet controller with Energy Efficient Ethernet (EEE) base on digital signal processing (DSP) technology with low dissipation

USB Device Controller

Integrates on-chip USB 3.0 PHY and controller compliant to USB Spec 3.0, 2.0 and 1.1

Supports all USB 3.0 power saving modes (U0, U1, U2, and U3)

Supports USB Super/High/Full Speed modes with Bus-power or Self-power device auto-detect capability

High performance packet transfer rate over USB bus using proprietary burst transfer mechanism (US Patent Approval)

Gigabit Ethernet Controller

Supports IEEE 802.3az (Energy Efficient Ethernet)

IEEE 802.3, 802.3u and 802.3ab compatible

Integrates 10/100/1000Mbps Gigabit Ethernet MAC/PHY

Supports dynamic cable length detection and dynamic power adjustment Green Ethernet (Gigabit mode only)

Supports parallel detection and automatic polarity correction

Supports crossover detection and auto- correction

Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU loading, including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum check & generation

Supports TCP Large Send Offload V1

Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control

Supports IEEE 802.1P Layer 2 Priority Encoding and Decoding

Supports IEEE 802.1Q VLAN tagging and 2 VLAN ID filtering; received VLAN Tag (4 bytes) can be stripped off or preserved

Supports Jumbo frame up to 4KB

PHY loop-back diagnostic capability

Support Wake-on-LAN Function

Supports suspend mode and remote wakeup via link-change, Magic Packet, Microsoft Wakeup Frame and external wakeup pin

Supports Bonjour wake-on-demand

Advanced Power Management Features

Supports power management offlo