ASIX AX88196BLI

Product Info

This product is EOL. Once inventory is sold, no further inventory will be recieved. This product has been replaced by the AX88796BLI. For datasheet, pricing and availability, please click the link in the franchise replacements section of this page.

The AX88196B is a non-PCI Ethernet controller with MII for the Embedded Ethernet applications. The AX88196B supports 8/16-bit SRAM-like host interface, providing a glue-less connection to most common embedded MCUs. The AX88196B integrates on-chip Fast Ethernet MAC and PHY, which is IEEE802.3 10Base-T and IEEE802.3u 100Base-TX compatible and 8Kx16 bits embedded SRAM for packet buffering to accommodate high bandwidth applications. The AX88196B has a wide array of features including support for Twisted Pair Crossover Detection and Auto-Correction, Wake-on-LAN power management and IEEE 802.3x and back-pressure flow control. The programming of AX88196B is simple and compatible with NE2000, so the users don't need any modification and can easily port the software drivers to many embedded systems very quickly. Combining these features with ASIX's free TCP/IP software stack for 8-bit microcontrollers, AX88196B provides the best Ethernet solution for embedded networking applications.

Features:

High-performance non-PCI local bus

Supports both 8 bit and 16 bit local CPU interfaces include MCS-51 series, 80186 series CPU and ISA bus

SRAM-like host interface (US Patent Approval), easily interfaced to most common embedded MCUs

Embeds 8Kx16 bits SRAM for packet buffers

Supports Slave-DMA to minimize CPU overhead

Supports burst-mode read for highest performance applications

Interrupt pin with programmable Hold-off timer

Single-chip Fast Ethernet controller

Compatible with IEEE802.3, 802.3u standards

Integrates Fast Ethernet MAC/PHY transceiver in one chip

Supports 10Mbps and 100Mbps data rate

Supports full and half duplex operations

Supports 10/100Mbps N-way Auto-negotiation operation

Supports twisted pair crossover detection and auto-correction (Auto-MDIX)

Supports IEEE 802.3x flow control for full-duplex operation

Supports back-pressure flow control for half-duplex operation

Provides optional MII interface for external 100BASE-FX Ethernet PHY, HomePNA PHY or HomePlug PHY

Supports Wake-on-LAN function to reduce power by following events

Detection of a change in the network link state

Receipt of a Magic Packet

Receipt of a MS wakeup frame

NE2000 register level compatible instruction

Detection performance can be enhanced with only a minor host driver modification from original NE2000 driver

Supports EEPROM interface to store MAC address (Opitional)

Supports up to 2 (out) /1 (in/out) General Purpose pins

Supports LED pins for various network activity indications

Integrates voltage regulator and 25MHz crystal oscillator

0.18um CMOS process. 3.3V power supply with 5V I/O tolerance

100-pin LQFP , RoHS package

Operate over -40 to +85C temperature range

Sales of ASIX products restricted to customers in North America only.