Search Results For: 3m elec prod
| Part Number | Description | In Stock | |
|---|---|---|---|
|
7000031605 Mfr: 3m elec prod |
3M™ Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3M’s proprietary cold shrink delivery system. Products are supplied prestretched on a removable core for efFiciency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated EPDM material promotes a permanent, durable environmental seal and insulation, with a typical operating temperature range from -40–194°F (-40–90°C). The 8420 insulator meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV. Applications: Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated to 1000 V. Good for repairs and environmental sealing for communication and other non-electrical applications. Important: Use insulation jacket or connector O.D. for Final ordering criteria. * Mastic pads included for cable O.D. build-up. ** Kit contains adapters. *** These sizes are listed for availability only and are not designed to be used as primary insulation. These tubes are for conduit sealing and breakouts. ****Maximum connector length: 5.625" "Point of Purchase" packaging designated by "P". Example: 8423-6P | 0 |
|
|
7000031606 Mfr: 3m elec prod |
ARMORCAST 4560-10 10, UPC: '00051138577179 | 0 |
|
|
7000031607 Mfr: 3m elec prod |
4561 ARMORCAST SHEATH REPAIR KIT, UPC:'00051138577209 | 0 |
|
|
7000031610 Mfr: 3m elec prod |
2178-LS/GSKT GASKET FOR 2178-L | 0 |
|
|
7000031614 Mfr: 3m elec prod |
88T-0.75X60 (3/4X60') VINYL TAPE, UPC:'00051138585174 | 0 |
|
|
7000031620 Mfr: 3m elec prod |
3M Catalog# 5730, 3M™ 3/C Low Voltage Splice Kit 5730, 1 kV, 1/case These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Sheath Wrap. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V. 3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00” (16–10 mm). Notes: Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. Amount of Sheath Wrap needed is based on two half-lapped layers and 15’ rolls UPC: 00054007431718 | 0 |
|
|
7000031621 Mfr: 3m elec prod |
3M Catalog# 5731, 3M™ 3/C Low Voltage Splice Kit 5731, CN/JCN Shielding, 0 - 600 V, 1/Case These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Sheath Wrap. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V. 3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00” (16–10 mm). Notes: Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. Amount of Sheath Wrap needed is based on two half-lapped layers and 15’ rolls UPC: 00054007431725 | 0 |
|
|
7000031622 Mfr: 3m elec prod |
3M Catalog# 5732, 3M™ 3/C Armored Power Cable Low Voltage Splice 5732, 0-600 kV, 2-1/0 AWG, 1/case These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Sheath Wrap. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V. 3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00” (16–10 mm). Notes: Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. Amount of Sheath Wrap needed is based on two half-lapped layers and 15’ rolls UPC: 00054007431732 | 0 |
|
|
7000031623 Mfr: 3m elec prod |
3M Catalog# 5733, 3M™ 3/C Armored Power Cable Low Voltage Splice 5733, 0-600 kV, 2/0 AWG-250 kcmil, 1/case These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Sheath Wrap. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V. 3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00” (16–10 mm). Notes: Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. Amount of Sheath Wrap needed is based on two half-lapped layers and 15’ rolls UPC: 00054007431749 | 0 |
|
|
7000031624 Mfr: 3m elec prod |
3M Catalog# 5734, 3M™ 3/C Armored Power Cable Low Voltage Splice 5734, 0-600 kV, 250-500 kcmil, 1/case These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Sheath Wrap. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V. 3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00” (16–10 mm). Notes: Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. Amount of Sheath Wrap needed is based on two half-lapped layers and 15’ rolls UPC: 00054007431756 | 0 |
|
|
7000031629 Mfr: 3m elec prod |
Scotch® Tape 2520 is an 8 mil thick, highly conformable, premium grade tape that's suitable for bus bars, motor leads and service drop connections. It withstands temperatures up to 221 °F (105 °C). | 0 |
|
|
7000031630 Mfr: 3m elec prod |
The 3M™ Dynatel™ Locator 2250/2273 Series is designed to Find the path and estimated depth of buried cables and pipes. | 0 |
|
|
7000031631 Mfr: 3m elec prod |
The 3M™ Dynatel™ Locator 2250/2273 Series is designed to Find the path and estimated depth of buried cables and pipes. | 0 |
|
|
7000031633 Mfr: 3m elec prod |
88T-0.75X36 (3/4X36') VINYL TAPE (180), UPC:'00051138708788 | 0 |
|
|
7000031635 Mfr: 3m elec prod |
4000-G/TR SUPER MINI SPLICING MODULE (GEL), UPC:'00051138709068 | 0 |
|
|
7000031638 Mfr: 3m elec prod |
6100-W CONNECTOR ST MM HOT MEL | 0 |
|
|
7000031639 Mfr: 3m elec prod |
6100-B CONNECTOR ST MM HOT MEL | 0 |
|
|
7000031640 Mfr: 3m elec prod |
6300-W CONNECTOR SC MM HOT MELT WHITE BOOT, UPC:'00054007917250 | 0 |
|
|
7000031642 Mfr: 3m elec prod |
8300 CONNECTOR SC SM HOT MELT | 0 |
|
|
7000031647 Mfr: 3m elec prod |
2250M-ID/EC5W/RT ULTRA ADV CABLE/PIPE LOC OUS COMM5W W/ID CAP, UPC: 00051115136108 | 0 |
|
|
7000031649 Mfr: 3m elec prod |
1422-XR/ID ID EXTENDED RANGE B | 0 |
|
|
7000031650 Mfr: 3m elec prod |
1425-XR/ID ID EXTENDED RANGE B | 0 |
|
|
7000031653 Mfr: 3m elec prod |
4005-GBM/TR SUPER MATE BRIDGE MODULE (GEL), UPC:'00051115150647 | 0 |
|
|
7000031654 Mfr: 3m elec prod |
1401-XR EMS 4" EXTENDED RANGE | 0 |
|
|
7000031656 Mfr: 3m elec prod |
HIGH GEL RE-ENTERABLE | 0 |
|
|
7000031659 Mfr: 3m elec prod |
8882-E (SIZE E 292ML) HIGH GEL | 0 |
|
|
7000031660 Mfr: 3m elec prod |
8200-W CONNECTOR FC SINGLE MODE HOT MELT 126UMWHITE BOOT, UPC: '00051138890629 | 0 |
|
|
7000031665 Mfr: 3m elec prod |
3M™ Epoxy Film Electrical Tape Super 10 is a 5 mil thick, high dielectric electrical tape. The flame retardant tape is used as a coil cover, anchor, harnessing, banding, core, layer and crossover insulation. This tape is 600V rated and withstands a temperature range of 32 to 311 °F (0 to 155 °C). | 0 |
|
|
7000031666 Mfr: 3m elec prod |
3M™ Epoxy Film Electrical Tape Super 20 is a 5 mil thick, high dielectric electrical tape. This flame retardant tape is used as a coil cover, anchor, harnessing, banding, core, layer and crossover insulation. This tape is 600V rated and withstands a temperature range of 32 to 311 °F (0 to 155 °C). | 0 |
|
|
7000031677 Mfr: 3m elec prod |
3M™ Filament Tape 1339 is a conformable, solvent resistant, high temperature Filament tape with acrylic adhesive. Designed for applications needing both the dielectric strength of polyester Film and the high mechanical strength of glass Fibers. | 0 |
|
|
7000031679 Mfr: 3m elec prod |
Scotch® Buried Barricade Tape 302 is a 4 mil thick, polyethylene Film backing, buried barricade tape that is printed with a warning message. When buried 4 to 6 inches below the surface, it provides an early warning when digging before reaching a depth that could cause damage or injury to a line or worker. | 0 |
|
|
7000031684 Mfr: 3m elec prod |
Scotch® 2000 Electrician’s Duct Tape is a 6 mil water resistant duct tape with a polyvinyl chloride (PVC) backing and a rubber adhesive. Scotch 2000 is designed to be an electrician’s utility tape for holding and bundling applications. | 0 |
|
|
7000031692 Mfr: 3m elec prod |
3M™ TufQUIN 110 and 120 Inorganic Hybrid Insulating Papers are hybrid inorganic-organic papers for high-temperature electrical insulation applications up to Class 200(N). | 0 |
|
|
7000031696 Mfr: 3m elec prod |
3M™ Scotchcast™ Electrical Resin 2123 is a soft, 2 part polybutadiene resin encapsulant. This resin has good handling and performance characteristics and is formulated for re enterable splice protection. This multi purpose, moisture sealing resin bonds to nearly all cable jackets. | 0 |
|
|
7000031699 Mfr: 3m elec prod |
4045-K2/36/FL/NXG MS2 UNIV SPL RIG W/4036-25Crimper & MTG HDW, UPC: '00051115184864 | 0 |
|
|
7000031701 Mfr: 3m elec prod |
8603-S CONNCTR LC SM HOT MELT | 0 |
|
|
7000031705 Mfr: 3m elec prod |
UDW2 DROP INLINE WIRE CONNECTOR, UPC:'10051115191449 | 0 |
|
|
7000031707 Mfr: 3m elec prod |
1251-XR/ID RFID FULL-RANGE MAR | 0 |
|
|
7000031708 Mfr: 3m elec prod |
1252-XR/ID ID FULL-RANGE MARKE | 0 |
|
|
7000031711 Mfr: 3m elec prod |
2559 FIBRLOK SPLICE KIT, UPC: | 0 |
|
|
7000031712 Mfr: 3m elec prod |
2535 FIBER ANGLE CLEAVER, UPC: | 0 |
|
|
7000031713 Mfr: 3m elec prod |
2501-AS FIBRLOK ANGLE SPLICE A | 0 |
|
|
7000031715 Mfr: 3m elec prod |
2565 FIBER OPTIC ANGLE CLEAVER | 0 |
|
|
7000031716 Mfr: 3m elec prod |
3M™ Dynatel™ Dyna Coupler is a tool speciFically designed for locating underground facilities. It allows coupling of RF trace tone to large diameter pipes, bundle cables and cables enclosed in accessible non metallic ducts. This coupler operates at a temperature range of 4 to 122 °F ( 20 to 50 °C). | 0 |
|
|
7000031717 Mfr: 3m elec prod |
VOL-6800 SC NPC,50UM,for250UM /900UM with Tool,UPC: '00051115260650 | 0 |
|
|
7000031718 Mfr: 3m elec prod |
VOL-6800-50/LOMMF NPC SC MM 50UMLOMMF 250/900UMw/Tool, UPC: '00051115260667 | 0 |
|
|
7000031719 Mfr: 3m elec prod |
VOL-6800 SC NPC, 62.5UM, for 2 | 0 |
|
|
7000031720 Mfr: 3m elec prod |
8800-APC/FS NPC SC/APC SM FLAT | 0 |
|
|
7000031721 Mfr: 3m elec prod |
8800-APC/AS NPC SC/APC SM ANGL | 0 |
|
|
7000031722 Mfr: 3m elec prod |
8865-AT NO POLISH CONNECTOR AS | 0 |
|
|
7000031725 Mfr: 3m elec prod |
2529-AS FIBRLOK II ANGLE SPLIC | 0 |
|
|
7000031726 Mfr: 3m elec prod |
UB2A-JAR500 26-19 AWG BRIDGE CONNECTOR JAR 500:5000 Connectors (10Jars), UPC: '10051115261937 | 0 |
|
|
7000031727 Mfr: 3m elec prod |
UR2(BX) 26-19 AWG BUTT CONNECT | 0 |
|
|
7000031728 Mfr: 3m elec prod |
6830-50 NO POLISH CONNECTOR LC MM 50UM 250/900UMW/TOOL, UPC: '00051115262159 | 0 |
|
|
7000031729 Mfr: 3m elec prod |
6830-50/LOMMF NO POLISH CONN LC MM 50UM LOMMF250/900UM W/TOOL, UPC: '00051115262166 | 0 |
|
|
7000031730 Mfr: 3m elec prod |
6830-62.5 NO POLISH CONNECTOR LC MM 62.5UM250/900UM W/TOOL, UPC: '00051115262173 | 0 |
|
|
7000031731 Mfr: 3m elec prod |
8830 NO POLISH CONNECTOR LC SM | 0 |
|
|
7000031732 Mfr: 3m elec prod |
2529-AS/B FIBRLOK II BULK(1000 | 0 |
|
|
7000031737 Mfr: 3m elec prod |
2550E-U12 M-SERIES PIPE/CABLE LOCATOR, UTL, 4.5COUPLER, 12W, UPC: 00051115535451 | 0 |
|
|
7000031738 Mfr: 3m elec prod |
2550E-ID/U12 M-SERIES PIPE/CBL/EMS LOCATOR, UTL,4.5 CPLR,12W, UPC: 00051115535468 | 0 |
|
|
7000031739 Mfr: 3m elec prod |
2573E-CU12 M-SERIES PIPE/CABLE/FAULT LCTR, COM/UTL3 CPLR 12W, UPC: 00051115535482 | 0 |
|
|
7000031740 Mfr: 3m elec prod |
2573E-ID/CU12 M-SERIES PIPE/CBL/FLT/EMS LCTR UTL 3CPLR 12W, UPC: 00051115535505 | 0 |
|
|
7000031741 Mfr: 3m elec prod |
8802-T/APC/AS/1.6-3 NO POLISH CONN SC/APC ANGL SPL1.6-3MM JKT, UPC: '00051115535857 | 0 |
|
|
7000031743 Mfr: 3m elec prod |
8802-T/APC/FS/1.6-3 NO POLISH CONN SC/APC FLAT SPL1.6-3MM JKT, UPC: '00051115535895 | 0 |
|
|
7000031744 Mfr: 3m elec prod |
HALL-300-12-03-SCA-LH-IV ONE PASS FIBER PATHWAYDUCT, UPC: '00051115536335 | 0 |
|
|
7000031745 Mfr: 3m elec prod |
HALL-300-12-03-SCA-RH-IV ONE P | 0 |
|
|
7000031754 Mfr: 3m elec prod |
3M Catalog# SLIM LOCK 716, 3M™ Slim Lock Closure 716, designed for wireless weatherproofing applications, 12/Case 3M™ Slim Lock Classic Closure is a re enterable, re usable and easy to use solution for the wireless industry. It protects RF connections at the antenna and remote radio units. The clamshell like design of the closure allows re entry, enabling repeated use of the closure. UPC: 00051111957424 | 0 |
|
|
7000031755 Mfr: 3m elec prod |
VOL-8865-C/PR NO POLISH CON NE | 0 |
|
|
7000031757 Mfr: 3m elec prod |
3M™ Dynatel™ Marker Tape Locators 7420 are high performance locators that quickly and efFiciently locate 3M™ EMS Caution Tape and existing electronic markers. In addition, the locators have the capability to read/write to 3M™ ID Markers. | 0 |
|
|
7000031758 Mfr: 3m elec prod |
7420-E EMS MARKER/TAPE LOCATOR WITH ID READ/WRITE,UPC: 00051115624650 | 0 |
|
|
7000031760 Mfr: 3m elec prod |
3M™ ScotchCode™ Wire Marker Tape ReFill Roll SDR is available in ten NEMA colors, individual numbers and consecutive numbers, letters and symbols. | 0 |
|
|
7000031761 Mfr: 3m elec prod |
3M™ ScotchCode™ Wire Marker Tape ReFill Roll SDR is available in ten NEMA colors, individual numbers and consecutive numbers, letters and symbols. | 0 |
|
|
7000031762 Mfr: 3m elec prod |
3M™ ScotchCode™ Wire Marker Tape ReFill Roll SDR is available in ten NEMA colors, individual numbers and consecutive numbers, letters and symbols. | 0 |
|
|
7000031763 Mfr: 3m elec prod |
3M™ ScotchCode™ Wire Marker Tape ReFill Roll SDR is available in ten NEMA colors, individual numbers and consecutive numbers, letters and symbols. | 0 |
|
|
7000031764 Mfr: 3m elec prod |
3M™ ScotchCode™ Wire Marker Tape ReFill Roll SDR is available in ten NEMA colors, individual numbers and consecutive numbers, letters and symbols. | 0 |
|
|
7000031765 Mfr: 3m elec prod |
3M™ ScotchCode™ Wire Marker Tape ReFill Roll SDR is available in ten NEMA colors, individual numbers and consecutive numbers, letters and symbols. | 0 |
|
|
7000031766 Mfr: 3m elec prod |
3M™ ScotchCode™ Wire Marker Tape ReFill Roll SDR is available in ten NEMA colors, individual numbers and consecutive numbers, letters and symbols. | 0 |
|
|
7000031767 Mfr: 3m elec prod |
3M™ ScotchCode™ Wire Marker Tape ReFill Roll SDR is available in ten NEMA colors, individual numbers and consecutive numbers, letters and symbols. | 0 |
|
|
7000031769 Mfr: 3m elec prod |
Scotch® Tape 31 is a 60 mil thick, premium grade, MSHA approved, heavy duty mining tape. This flexible tape provides resistance to abrasion, water and oil. It has an aggressive, abrasion resistant, rubber backing that is ideal for splicing and repairing jackets on mining cables. It withstands a wide temperature range of 32 to 221 °F (0 to 105 °C). | 0 |
|
|
7000031770 Mfr: 3m elec prod |
Scotch® Tape 31 is a 60 mil thick, premium grade, MSHA approved, heavy duty mining tape. This flexible tape provides resistance to abrasion, water and oil. It has an aggressive, abrasion resistant, rubber backing that is ideal for splicing and repairing jackets on mining cables. It withstands a wide temperature range of 32 to 221 °F (0 to 105 °C). | 0 |
|
|
7000031774 Mfr: 3m elec prod |
Scotch® Buried Barricade Tape 302 is a 4 mil thick, polyethylene Film backing, buried barricade tape that is printed with a warning message. When buried 4 to 6 inches below the surface, it provides an early warning when digging before reaching a depth that could cause damage or injury to a line or worker. | 0 |
|
|
7000031784 Mfr: 3m elec prod |
3M™ TufQUIN™ Inorganic Hybrid Insulating Paper provides excellent thermal stability and long term voltage endurance. This highly flexible paper is ideal for high performance electrical applications. It provides low moisture absorption and exhibits low moisture content, even under high humidity conditions. 3M™ TufQUIN™ Inorganic Hybrid Insulating Paper exhibits high thermal conductivity and coil bonding characteristics when impregnated. This flexible paper offers enhanced toughness and resists tears, making it suitable for use in more rigorous winding applications. This highly conformable paper maintains a high percentage dielectric strength and is ideal for use in dry type transformers, coils, reactors, wire and cable wrap, pressure sensitive tapes, spiral and convolute tubing. | 0 |
|
|
7000031842 Mfr: 3m elec prod |
3M™ Scotchlok™ Heat Shrink Butt Connector ensures an ideal Fit with great performance. It withstands a maximum temperature of 221 degrees F (105 degrees C). Electrolytic copper construction offers good conductivity and a tin-plated Finish resists corrosion. | 0 |
|
|
7000031843 Mfr: 3m elec prod |
3M™ Scotchlok™ Heat Shrink Butt Connector ensures an ideal Fit with great performance. It withstands a maximum temperature of 221 degrees F (105 degrees C). Electrolytic copper construction offers good conductivity and a tin-plated Finish resists corrosion. | 0 |
|
|
7000031844 Mfr: 3m elec prod |
3M™ Scotchcast™ Electrical Resin 2131 is a 2 part, flame retardant compound, useful for coating cable jackets when splicing or repairing mine and portable cables. This permanent, polyurethane, liquid type resin has a unique formulation used in rugged conditions. The high dielectric strength offers a very good electrical insulating property to the resin. | 0 |
|
|
7000031845 Mfr: 3m elec prod |
3M™ 5760 Series Cold Shrink Inline Splice Kit with 2131 compound, is designed for splicing shielded, 5/8 to 15 kV armored or non armored cables. It is used in cable trays, junction boxes and cable racks/hangers, as well as aerial and wet or dry locations. | 0 |
|
|
7000031846 Mfr: 3m elec prod |
3M™ Scotchcast™ M Series Cable Repair Kit offers permanent, moisture resistant jacket repairs and helps in portable cable splicing. This kit includes a reUSble wraparound mold, flame retardant compound and accessories that are necessary for repairing cable jackets. It is suitable for insulation, mechanical protection and repairs, or splices of cables rated up to 2 kV. | 0 |
|
|
7000031847 Mfr: 3m elec prod |
3M™ Scotchcast™ M Series Cable Repair Kit offers permanent, moisture resistant jacket repairs and helps in portable cable splicing. This kit includes a reUSble wraparound mold, flame retardant compound and accessories that are necessary for repairing cable jackets. It is suitable for insulation, mechanical protection and repairs, or splices of cables rated up to 2 kV. | 0 |
|
|
7000031848 Mfr: 3m elec prod |
3M™ Scotchcast™ M Series Cable Repair Kit offers permanent, moisture resistant jacket repairs and helps in portable cable splicing. This kit includes a reUSble wraparound mold, flame retardant compound and accessories that are necessary for repairing cable jackets. It is suitable for insulation, mechanical protection and repairs, or splices of cables rated up to 2 kV. | 0 |
|
|
7000031849 Mfr: 3m elec prod |
3M™ Standard Nylon Cable Ties are made with high-quality nylon 6/6 and designed to secure wire bundles and harness components quickly, without slipping. The curved tip allows for faster threading and installation, and they feature a self-locking head. | 0 |
|
|
7000031850 Mfr: 3m elec prod |
3M™ Standard Nylon Cable Ties are made with high-quality nylon 6/6 and designed to secure wire bundles and harness components quickly, without slipping. The curved tip allows for faster threading and installation, and they feature a self-locking head. | 0 |
|
|
7000031851 Mfr: 3m elec prod |
3M™ Standard Nylon Cable Ties are made with high-quality nylon 6/6 and designed to secure wire bundles and harness components quickly, without slipping. The curved tip allows for faster threading and installation, and they feature a self-locking head. | 0 |
|
|
7000031852 Mfr: 3m elec prod |
3M™ Standard Nylon Cable Ties are made with high-quality nylon 6/6 and designed to secure wire bundles and harness components quickly, without slipping. The curved tip allows for faster threading and installation, and they feature a self-locking head. | 0 |
|
|
7000031853 Mfr: 3m elec prod |
3M™ Standard Nylon Cable Ties are made with high-quality nylon 6/6 and designed to secure wire bundles and harness components quickly, without slipping. The curved tip allows for faster threading and installation, and they feature a self-locking head. | 0 |
|
|
7000031854 Mfr: 3m elec prod |
3M™ Standard Nylon Cable Ties are made with high-quality nylon 6/6 and designed to secure wire bundles and harness components quickly, without slipping. The curved tip allows for faster threading and installation, and they feature a self-locking head. | 0 |
|
|
7000031855 Mfr: 3m elec prod |
3M™ Standard Nylon Cable Ties are made with high-quality nylon 6/6 and designed to secure wire bundles and harness components quickly, without slipping. The curved tip allows for faster threading and installation, and they feature a self-locking head. | 0 |
|
|
7000031856 Mfr: 3m elec prod |
3M™ Standard Nylon Cable Ties are made with high-quality nylon 6/6 and designed to secure wire bundles and harness components quickly, without slipping. The curved tip allows for faster threading and installation, and they feature a self-locking head. | 0 |
|
|
7000031857 Mfr: 3m elec prod |
3M™ Standard Nylon Cable Ties are made with high-quality nylon 6/6 and designed to secure wire bundles and harness components quickly, without slipping. The curved tip allows for faster threading and installation, and they feature a self-locking head. | 0 |
|
|
7000031858 Mfr: 3m elec prod |
3M™ Standard Nylon Cable Ties are made with high-quality nylon 6/6 and designed to secure wire bundles and harness components quickly, without slipping. The curved tip allows for faster threading and installation, and they feature a self-locking head. | 0 |
|
|
7000031859 Mfr: 3m elec prod |
3M™ Standard Nylon Cable Ties are made with high-quality nylon 6/6 and designed to secure wire bundles and harness components quickly, without slipping. The curved tip allows for faster threading and installation, and they feature a self-locking head. | 0 |
|